The INNO3D GeForce RTX 5070 Ti X3 OC WHITE is a white graphics card for all-white builds that need serious 1440p and 4K performance. It has 8960 CUDA cores, 16GB of GDDR7 on a 256-bit bus and a factory boost of 2482MHz in a slim 2-slot, 300mm design.
Key features
- NVIDIA GeForce RTX 5070 Ti with 8960 CUDA cores, factory overclocked to 2482MHz
- 16GB GDDR7 at 28Gbps on a 256-bit bus (896GB/s)
- Three 88mm fans, six nickel-plated heat pipes and a full-coverage copper base
- Slim 2-slot design, 300mm long, with metal backplate
- 3 x DisplayPort 2.1b and 1 x HDMI 2.1b, up to four displays
Specifications
| Model | INNO3D GeForce RTX 5070 Ti X3 OC WHITE (N507T3-16D7X-176068W) |
|---|---|
| GPU / CUDA cores | NVIDIA GeForce RTX 5070 Ti / 8960 |
| Clocks | Boost 2482MHz (OC), base 2295MHz |
| Memory | 16GB GDDR7, 28Gbps, 256-bit, 896GB/s |
| Interface | PCI Express Gen 5 |
| Outputs | 3 x DisplayPort 2.1b, 1 x HDMI 2.1b; 4K@480Hz or 8K@165Hz with DSC |
| Power | 16-pin PCIe Gen 5 (or 2 x 8-pin via included adapter), 750W PSU recommended |
| Dimensions | 300 x 116 x 41mm, 2-slot |
| Colour | White |
Compatibility
Use a 750W or higher PSU with a native 12V-2x6 (16-pin) cable, or the included adapter with two PCIe 8-pin cables. Most modern ATX cases fit a 300mm card; check your case's limit. It also runs on PCIe 4.0 boards.
FAQ
Is 16GB enough for 4K?
Yes for most current games. 16GB of GDDR7 leaves room for high textures at 1440p and 4K, and DLSS 4 Multi Frame Generation lifts 4K frame rates further.
What power supply do I need?
INNO3D recommends at least 750W. The card uses a 16-pin connector, with a 2 x 8-pin adapter in the box.
Will it fit a mid-size case?
It is 300mm long, 116mm tall and 41mm thick. Most ATX and many modern micro-ATX cases accept it; check your case's maximum GPU length.